Indoor Air Quality (IAQ) Testing (Unit 2)

Air Quality & Acoustic Testing · Carrier · Eastern Province (RIG)

Air Quality & Acoustic Testing·Job #26/1/1069/1·Eastern Province (RIG), KSA·2026
Air Quality Testing at Carrier RIG facility

1. Assignment Overview

On-site Indoor Air Quality (IAQ) sampling and environmental parameter testing at Eastern Province (RIG) for Carrier (Job #26/1/1069/1). Field measurements evaluated ventilation effectiveness and indoor air contaminants across accommodation and operational spaces.

2. Scope of Work & Deliverables

  • Spot and continuous logging of indoor Carbon Dioxide (CO₂), Carbon Monoxide (CO), temperature, and relative humidity
  • Particulate matter (PM2.5 and PM10) and Total Volatile Organic Compound (TVOC) concentration measurements across occupied rooms
  • Assessment of fresh air intake rates and AHU filtration condition affecting indoor air quality
  • Comparison of recorded readings against recognized indoor environmental exposure limits (ASHRAE 62.1 / project HSE criteria)
  • Issuance of certified IAQ Test Report with zone-by-zone data tables, instrument calibration certificates, and observations

3. Field Challenges & Engineering Solutions

Rig & Industrial Site Mobilization

Testing personnel mobilized with portable, battery-operated calibrated IAQ monitors under site safety clearances without disrupting rig operations.

Representative Sampling

Measurements were taken across living quarters, offices, and galley/common areas under normal occupancy and HVAC operating conditions.

4. Key Achievements & Verified Outcomes

PM, CO₂, TVOC, T/RH logged
Multi-Gas
IAQ test instruments
Calibrated
IAQ report submitted
Complete